Transition to MPEG-4

In April 2017 Shaw Broadcast will begin transitioning all MPEG-2 satellite signals to MPEG-4 (this does not impact signals on ANIK G1 as these signals are already MPEG-4). Conversions will occur in three phases over three years from approximately April to October of 2017, 2018 and 2019. Our objective is to be 100% MPEG-4 by the Fall of 2019.

We are transitioning to MPEG-4 because the legacy MPEG-2 encoding equipment is reaching End of Support status. This means that within the next few years the MPEG-2 encoding equipment used by Shaw Broadcast will no longer be able to be supported or repaired. Upgrading to current generation MPEG-4 equipment allows our customers to continue to broadcast television signals for distribution.

To continue to receive signals from ANIK F1R and F2, BDUs will require equipment capable of receiving MPEG-4 satellite signals in their head ends. If this equipment transcodes the signal back to MPEG-2 before distributing it over the local cable network, no customer premise upgrades would be required. If this equipment sends out a MPEG-4 signal, then all Cable customer premise equipment must be capable of handling an MPEG-4 signal. Transcoding signals is not an option for BDUs utilizing the QT Plus product, all customer premise equipment must be MPEG-4 capable.

To obtain assistance with purchasing equipment for the transition please contact:
Capella Trispec
Wayne Rabey, President Claude A. Mailhot, Director - Delivery & Customer Service Group
wrabey@capella.ca cmailhot@trispec.com
(Office) 1-800-668-0175 (Office) 514-328-2025 x2222
(Cell) 905-478-2989 (Cell) 514-609-5150

Note: This Plan is subject to change, please check our website for updates.



Transition Plan (Revised documents - 17-Jan-17)

MPEG-4 FAQs

Current

Phase 1 — April 2017 to October 2017

Phase 2 — April 2018 to October 2018

Phase 3 — April 2019 to October 2019

Completed Transition

Migration Signals List

Transition Plan Decoders / Hardware Information

Blonder Tongue

Drake

ARRIS

Transition Plan Bulletins

April 20, 2017
Transition to MPEG-4 - Changes Occurring in May 2017
March 21, 2017
Transition to MPEG-4 - Changes Occurring in April 2017
February 7, 2017
Phase 1 Technical Information
January 20, 2017
MPEG-2 to MPEG-4 Transition Update Version 9
January 10, 2017
Transition to MPEG-4 Reminder
November 3, 2016
MPEG-4 Transition Plan Bulletin Update 2
June 22, 2016
MPEG-2 to MPEG-4 Transition Plan Update
March 30, 2016
MPEG-2 to MPEG-4 Transition Plan